Molecular Additives Improve the Selectivity of CO2 Photoelectrochemical Reduction over Gold Nanoparticles on Gallium Nitride.

Photoelectrochemical CO2 reduction (CO2R) is an appealing solution for converting carbon dioxide into higher-value products. However, CO2R in aqueous electrolytes suffers from poor selectivity due to the competitive hydrogen evolution reaction that is dominant on semiconductor surfaces in aqueous electrolytes. We demonstrate that functionalizing gold/p-type gallium nitride devices with a film derived from diphenyliodonium triflate suppresses hydrogen generation from 90% to 18%. As a result, we observe increases in the Faradaic efficiency and partial current density for carbon monoxide of 50% and 3-fold, respectively. Furthermore, we demonstrate through optical absorption measurements that the molecular film employed herein, regardless of thickness, does not affect the photocathode's light absorption. Altogether, this study provides a rigorous platform for elucidating the catalytic structure-property relationships to enable engineering of active, stable, and selective materials for photoelectrochemical CO2R.

Discovery of complex oxides via automated experiments and data science.

The quest to identify materials with tailored properties is increasingly expanding into high-order composition spaces, with a corresponding combinatorial explosion in the number of candidate materials. A key challenge is to discover regions in composition space where materials have novel properties. Traditional predictive models for material properties are not accurate enough to guide the search. Herein, we use high-throughput measurements of optical properties to identify novel regions in three-cation metal oxide composition spaces by identifying compositions whose optical trends cannot be explained by simple phase mixtures. We screen 376,752 distinct compositions from 108 three-cation oxide systems based on the cation elements Mg, Fe, Co, Ni, Cu, Y, In, Sn, Ce, and Ta. Data models for candidate phase diagrams and three-cation compositions with emergent optical properties guide the discovery of materials with complex phase-dependent properties, as demonstrated by the discovery of a Co-Ta-Sn substitutional alloy oxide with tunable transparency, catalytic activity, and stability in strong acid electrolytes. These results required close coupling of data validation to experiment design to generate a reliable end-to-end high-throughput workflow for accelerating scientific discovery.

Assessing Effects of Near-Field Synergistic Light Absorption on Ordered Inorganic Phototropic Growth.

We report herein that synergistic light absorption in the optical near-field enables nanoscale self-organization during inorganic phototropic growth. Se-Te was grown electrochemically under illumination from an incoherent, unstructured light source in geometrically constrained, wavelength scale areas. Despite the limited dimensions, with as few as two discrete features produced in a single sub-micron dimension, the deposit morphology exhibited defined order and anisotropy. Computer modeling analysis of light absorption in simulated structures revealed a synergy wherein light capture in a nanoscale feature was enhanced by the presence of additional adjacent features, with the synergistic effect originating predominantly from nearest neighbor contributions. Modeling moreover indicated that synergistic absorption is produced by scattering of the incident illumination by individual nanoscale features, leading to a local increase in the near-field intensity and consequently increasing the absorption in neighboring features. The interplay between these optical processes establishes the basis for spontaneous order generation via inorganic phototropic growth.

Genesis and Propagation of Fractal Structures During Photoelectrochemical Etching of n-Silicon.

The genesis, propagation, and dimensions of fractal-etch patterns that form anodically on front- or back-illuminated n-Si(100) photoelectrodes in contact with 11.9 M NH4F (aqueous) have been investigated during either a linear potential sweep or a constant potential hold (E = +6.0 V versus Ag/AgCl). Optical images collected in situ during electrochemical experiments revealed the location and underlying mechanism of initiation and propagation of the structures on the surface. X-ray photoelectron spectroscopic (XPS) data collected for samples emersed from the electrolyte at varied times provided detailed information about the chemistry of the surface during fractal etching. The fractal structure was strongly influenced by the orientation of the crystalline Si sample. The etch patterns were initially generated at points along the circumference of bubbles that formed upon immersion of n-Si(100) samples in the electrolyte, most likely due to the electrochemical and electronic isolation of areas beneath bubbles. XPS data showed the presence of a tensile-stressed silicon surface throughout the etching process as well as the presence of SiOxFy on the surface. The two-dimensional fractal dimension, Df,2D, of the patterns increased with etching time to a maximum observed value of Df,2D = 1.82. Promotion of fractal etching near etch masks that electrochemically and electronically isolated areas of the photoelectrode surface enabled the selective placement of highly branched structures at desired locations on an electrode surface.

Experimental Methods for Efficient Solar Hydrogen Production in Microgravity Environment.

Long-term space flights and cis-lunar research platforms require a sustainable and light life-support hardware which can be reliably employed outside the Earth's atmosphere. So-called 'solar fuel' devices, currently developed for terrestrial applications in the quest for realizing a sustainable energy economy on Earth, provide promising alternative systems to existing air-revitalization units employed on the International Space Station (ISS) through photoelectrochemical water-splitting and hydrogen production. One obstacle for water (photo-) electrolysis in reduced gravity environments is the absence of buoyancy and the consequential, hindered gas bubble release from the electrode surface. This causes the formation of gas bubble froth layers in proximity to the electrode surface, leading to an increase in ohmic resistance and cell-efficiency loss due to reduced mass transfer of substrates and products to and from the electrode. Recently, we have demonstrated efficient solar hydrogen production in microgravity environment, using an integrated semiconductor-electrocatalyst system with p-type indium phosphide as the light-absorber and a rhodium electrocatalyst. By nanostructuring the electrocatalyst using shadow nanosphere lithography and thereby creating catalytic 'hot spots' on the photoelectrode surface, we could overcome gas bubble coalescence and mass transfer limitations and demonstrated efficient hydrogen production at high current densities in reduced gravitation. Here, the experimental details are described for the preparations of these nanostructured devices and further on, the procedure for their testing in microgravity environment, realized at the Bremen Drop Tower during 9.3 s of free fall.

Efficient solar hydrogen generation in microgravity environment.

Long-term space missions require extra-terrestrial production of storable, renewable energy. Hydrogen is ascribed a crucial role for transportation, electrical power and oxygen generation. We demonstrate in a series of drop tower experiments that efficient direct hydrogen production can be realized photoelectrochemically in microgravity environment, providing an alternative route to existing life support technologies for space travel. The photoelectrochemical cell consists of an integrated catalyst-functionalized semiconductor system that generates hydrogen with current densities >15 mA/cm2 in the absence of buoyancy. Conditions are described adverting the resulting formation of ion transport blocking froth layers on the photoelectrodes. The current limiting factors were overcome by controlling the micro- and nanotopography of the Rh electrocatalyst using shadow nanosphere lithography. The behaviour of the applied system in terrestrial and microgravity environment is simulated using a kinetic transport model. Differences observed for varied catalyst topography are elucidated, enabling future photoelectrode designs for use in reduced gravity environments.

Advancing semiconductor-electrocatalyst systems: application of surface transformation films and nanosphere lithography.

Photoelectrochemical (PEC) cells offer the possibility of carbon-neutral solar fuel production through artificial photosynthesis. The pursued design involves technologically advanced III-V semiconductor absorbers coupled via an interfacial film to an electrocatalyst layer. These systems have been prepared by in situ surface transformations in electrochemical environments. High activity nanostructured electrocatalysts are required for an efficiently operating cell, optimized in their optical and electrical properties. We demonstrate that shadow nanosphere lithography (SNL) is an auspicious tool to systematically create three-dimensional electrocatalyst nanostructures on the semiconductor photoelectrode through controlling their morphology and optical properties. First results are demonstrated by means of the photoelectrochemical production of hydrogen on p-type InP photocathodes where hitherto applied photoelectrodeposition and SNL-deposited Rh electrocatalysts are compared based on their J-V and spectroscopic behavior. We show that smaller polystyrene particle masks achieve higher defect nanostructures of rhodium on the photoelectrode which leads to a higher catalytic activity and larger short circuit currents. Structural analyses including HRSEM and the analysis of the photoelectrode surface composition by using photoelectron spectroscopy support and complement the photoelectrochemical observations. The optical performance is further compared to theoretical models of the nanostructured photoelectrodes on light scattering and propagation.